Pneutorque 52mm Series-Torque Monitor and Shut-Off

The integration of electronic torque measurement and control into the PT52 Series is achieved with the minimum impact on overall tool size and weight. Torque Monitor – these stall tools are fitted with a torque transducer, torque display and limit detection. As the tool is operated, the applied torque is displayed on the tool handle. It is possible to set low and high limits so that when the tool stalls, either an orange, green or red light is illuminated on the display panel. Shut-Off – these are similar to the Torque Monitor tools but with the addition of an in-built solenoid valve to shut off the air supply to the motors once the low limit has been achieved. Because the tool is not relying on a set air pressure to achieve stall at a specific torque, air pressure can generally be kept higher than with stall tools and this results in greater speed. This is the ultimate PT52 and will appeal to production line customers seeking a self contained shut-off solution with no need for complicated and expensive external controllers.

600 Nm Tools with Torque Monitor

1000 Nm Tools with Torque Monitor

600 Nm Tools with Shut off

1000 Nm Tools with Shut off

*Including Reaction Arm
** Speed at max air pressure