A complete TORQUE TOOLS Specialty House…

United States 1-800-356-5624 Canada 1-800-663-6344
fr

Torquetools

McCann Equipment Ltd., carries a complete range of torque tool products.
Such as manual, pneumatic, electric and hydraulic torque wrenches.
Complete range of torque multipliers.

EVOTORQUE® 2

norbar_logo

ELECTRONIC TORQUE MULTIPLIERS
AN EVOLUTION FOR TORQUE CONTROL

The EvoTorque®2 is an electronic torque tool
designed for accurately applying torque to
threaded fasteners. Tools are factory calibrated
to ±3% of reading. The unique ‘intelligent joint
sensing’ technology continually measures the joint
during tightening and, when necessary, employs
dynamic braking to avoid torque over-shoot due
to motor inertia. Consequently, EvoTorque® can
apply torque accurately over a wide range of joint
rates from hard (high torque rate) through to soft
(low torque rate). All EvoTorque® tools are highly
tolerant of supply voltage and frequency variation.
When the tool runs, it will run accurately. If the
supply voltage is outside of tolerance then, as a
safety feature,the tool will be prevented from
starting. The EvoTorque®2 has the ability to
memorise multiple targets, work IDs, user IDs
and readings. A work sequence (flow) can be
performed on the EvoTorque®2, taking the
user through a pre-defined tightening sequence.
The tool has three modes of operation:
Torque, Torque and Angle and Torque Audit.
The unique Audit Mode is a sophisticated feature
for testing pre-tightened bolts with minimal
impact on the original fastening torque and
can provide quality control data for monitoring
joint performance over time. EvoTorque®2 builds
on the original tool with these additional features:

Norbar have combined proven Joint Sensing Technology, data memory and transfer
capabilities with torque, torque and angle and audit modes to produce a highly accurate,
user friendly, robust and versatile electronic torque tool.

Every joint is different. Evotorque® 2’s intelligent joint sensing technology always detects which
type of bolt you are working with. Traditional electronic torque tools give vastly different results
depending on the joint type. Norbar’s intelligent joint sensing technology eliminates these issues
so that you can be confident in your bolting work.

ACCURACY OF ELECTRONIC TORQUE TOOLS

*High torque rate and low torque rate as defined by ISO5393
“Rotary tools for threaded fasteners – Performance test method”

KEY FEATURES

• Multiple units of torque measurement, including N.m, lbf.ft, ft.lb and kgf.m
• Calibrated from 20% to 100% of tool range
• Torque, Torque & Angle and Torque Audit modes available
• In Torque and Angle Mode and Audit Mode, torque can be set from10% of tool maximum
• Display and on-board storage of final torque or torque and angle values
• 3000 reading memory, time and date stamped
• Clear indication of successful joint application
• USB and Bluetooth® 4.0 data transfer (also called Bluetooth® Smart)
• Complimentary PC software ’EvoLog‘ for data management and tool configuration
• 12 user IDs can be downloaded to the tool and results can be stored against individual users
• 20 unique standalone targets plus 20 unique work group targets for each work group
• Results can be output in CSV (comma-separated values) format
for users not able to use EvoLog

FEATURES FROM MAY 2017

• Ability to produce and store real time graphs via EvoLog
• Torque & Angle with Final Torque
• ’Usage‘ counter gives the ability to see the amount of times
the tool has been used since the last reset
• “Operation Direction” feature designed primarily for undoing bolts.
When doing sequence tightening, it is now possible to undo an incorrectly
tightened bolt without interrupting the sequence.
• Two stage tightening gives faster application of a Snug Torque & Angle Target
• “Turn Angle” option can be used to check if bolts have already been
tightened in as assembly process
• Allows tool integration into third party control systems
• Two different lock levels, lock level 1 as per previous lock, lock level 2
will not allow user to exit the run screen or change the target
• Maximum Audit Mode target angle increased to 720 degrees

TECHNICAL SPECIFICATIONS

 

Model: ET-72-1000-110 / ET-72-1000-230
Part Number 110V : 180230 / 230V : 180220
Square Drive: 3/4”
Range: 200-1000 N.m (148-738 lbf.ft)
Speed rpm: 21
Tool Weight: 10.4 kg (22.9 lb)
Reaction Weight: 1.5 kg (3.3 lb)
B (mm): 390 / C (mm): 438 / D (mm): 77 / E (Ømm): 72 / F (mm): 100 / G (mm): 135.5

Model: ET-72-1350-110 / ET-72-1350-230
Part Number 110V : 180231 / 230V : 180221
Square Drive: 3/4”
Range: 270-1350 N.m (199-996 lbf.ft)
Speed rpm: 17
Tool Weight: 10.4 kg (22.9 lb)
Reaction Weight: 1.5 kg (3.3 lb)
B (mm): 390 / C (mm): 438 / D (mm): 77 / E (Ømm): 72 / F (mm): 100 / G (mm): 135.5

Model: ET-72-2000-110 / ET-72-2000-230
Part Number 110V : 180232 / 230V : 180222
Square Drive: 1”
Range: 400-2000 N.m (295-1475 lbf.ft)
Speed rpm: 11
Tool Weight: 10.8 kg (23.8 lb)
Reaction Weight: 1.5 kg (3.3 lb)
B (mm): 425 / C (mm): 438 / D (mm): 77 / E (Ømm): 72 / F (mm): 100 / G (mm): 135.5

Model: ET-92-2700-110 / ET-92-2700-230Part Number 110V : 180233 / 230V : 180223
Square Drive: 1”
Range: 540-2700 N.m (398-1991 lbf.ft)
Speed rpm: 8.5
Tool Weight: 12.85 kg (28.3 lb)
Reaction Weight: 2.6 kg (5.7 lb)
B (mm): 450 / C (mm): 438 / D (mm): 75 / E (Ømm): 92 / F (mm): 100 / G (mm): 135.5

Model: ET-92-4000-110 / ET-92-4000-230
Part Number 110V : 180234 / 230V : 180224
Square Drive: 1”
Range: 800-4000 N.m (590-2950 lbf.ft)
Speed rpm: 6
Tool Weight: 12.85 kg (28.4 lb)
Reaction Weight: 2.6 kg (5.7 lb)
B (mm): 450 / C (mm): 438 / D (mm): 75 / E (Ømm): 92 / F (mm): 100 / G (mm): 135.5

Model: ET-119-6000-110 / ET-119-6000-230
Part Number 110V : 180235 / 230V : 180225
Square Drive: 1-1/2”
Range: 1200-6000 N.m (885-4425 lbf.ft)
Speed rpm: 3.3
Tool Weight: 16.8 kg (37 lb)
Reaction Weight: 3.9 kg (8.6 lb)
B (mm): 480 / C (mm): 438 / D (mm): 95 / E (Ømm): 119 / F (mm): 115 / G (mm): 135.5

Model: ET-119-7000-110 / ET-119-7000-230
Part Number 110V : 180236 / 230V : 180226
Square Drive: 1-1/2”
Range: 1400-7000 N.m (1030-5160 lbf.ft)
Speed rpm: 3.3
Tool Weight: 16.8 kg (37 lb)
Reaction Weight: 3.9 kg (8.6 lb)
B (mm): 480 / C (mm): 438 / D (mm): 95 / E (Ømm): 119 / F (mm): 115 / G (mm): 135.5

© Norbar Torque Tools Ltd 2017

Back