Pneutorque Remote Control, PT1500 & Standard Series

PT 1500 Series

Remote control versions have no direction/shut-off control on the tool but rely on external pneumatic circuitry to provide this function. This opens up numerous application possibilities for the Pneutorque ranging from simple stall shut-off in a hazardous working environment to sophisticated, multi-spindle torque and angle shut-off systems.

• Stall control gives repeatability of ± 5% on a given joint.

• Torque transducers and angle encoders available for all 40 models. These form the basis of sophisticated control systems giving repeatability of up to ± l %.

• Automatic Two Speed gearbox reduces run-down times.

• Each gearbox supplied with a standard reaction device or one specifically designed to suit the application.

PT 1500 Series, Remote Control

*Including Reaction Plate
** Speed at max air pressure

Standard Series

All Standard and Small Diameter Series Pneutorques are available fitted with the remote motor.

• Stall control gives repeatability of ±5% on a given joint.

• Torque transducers and angle encoders available for all 40 models. These form the basis of sophisticated control systems giving repeatability of up to ±l %.

• Automatic Two Speed gearbox reduces run-down times.

• Each gearbox supplied with a standard reaction device or one specifically designed to suit the application.

Standard Series Remote Control

*Including reaction plate
** Speed at an air pressure of 80psi and in high gear where applicable.