Norbar®
Precision Instruments
Tone®
TorqueLeader
Torque Wrenches
Torque Screwdrivers
Pneumatic Torque Wrenches
Assembly Tools
Trucking Tire Industry Tools
Analyzers & Controllers
Calibration & Repair
Product Line
Hydraulic Wrenches
Home Page
Click to Send Email

Français



Click Here

ISO-17025
Click Here

 

Please select a Pneutorque product by using the drop-down menu below.

Pneutorque PT1500 Series

These Pneutorque models share the same features as the 'Standard' Series, but have a higher torque output for a given gearbox diameter.

  • Reduced diameter allows improved access.

  • High torque output - up to 4000 Lbf.ft.

  • Reversible - Pneutorque can be used for tightening and untightening.

  • Reaction foot can slide on the spline to allow for sockets of various lengths.

  • Electronic torque transducers can be fitted for precise torque monitoring.

Small Diameter Series, Single Speed

Model Square
Drive
Part
Code
Range Free
Speed**
A B C D
min
D
max
Weight*
in N.m lbf.ft mm mm mm mm mm kg
2700 1 18027 880-2700 650-2000 5 108 437 140 469 498 16.5
4500 1 18038 900-4500 660-3300 4 108 390 175 - 484 17.7
5500 1-1/2 18028 1200-5500 885-4000 2.5 119 512 172 566 592 21.9

*Including Reaction Arm
** Speed at max air pressure

Small Diameter Series, Two Speed Models
Two Speed models offer all of the advantages of the single speed versions but with the additional benefit of a run down speed five times greater than the final torque speed.

 

 

Small Diameter Series, Manual Two Speed

Model Square
Drive
Part
Code
Range Free
Speed**
A B C D
min
D
max
Weight*
in N.m lbf.ft mm mm mm mm mm kg
2700 MTS 1 18027.MTS 880-2700 650-2000 25 108 524 140 556 585 20.0
5500 MTS 1-1/2 18028.MTS 1200-5500 885-4000 12.5 119 598 172 652 678 25.4

Small Diameter Series, Automatic Two Speed

Model Square
Drive
Part
Code
Range Free
Speed**
A B C D
min
D
max
Weight*
in N.m lbf.ft mm mm mm mm mm kg
2700 AUT 1 18027.AUT 880-2700 650-2000 25 108 506 140 538 567 20.0
4500AUT 1 18038.AUT 2400-4500 1750-3300 13.5 108 462 175 - 556 20.0
5500 AUT 1-1/2 18028.AUT 1200-5500 885-4000 12.5 119 581 172 635 661 25.4

*Including reaction foot
** Speed at max air pressure and in high gear.

 

[Home]  -  [Norbar ®]  -  [Precision Instruments]  -  [Tone ®]  -  [Torqueleader]  -  [Torque Wrenches]  -  [Torque Screwdrivers]  -  [Pneumatic Torque Wrenches]  -  [Assembly Tools]  -  [Analyzers & Controllers]  -  [Trucking Tire/Industry Tools]  - [Calibration & Repair]  -  [Hydraulic Tensioning Systems]  -  [Product Line]  -  [Sitemap]


From the USA?
Please visit our US division at www.ephtools.com

McCANN Equipment Ltd.
1-800-663-6344
info@torquetools.com


Click each of the cities above with your mouse
for address & contact information

Copyright © 1999-2005 McCANN Equipment Ltd. All rights reserved.