All transducers up to 5000 N.m (or 5000 lbf.ft) are supplied as standard with a UKAS calibration certificate from Norbar's in-house laboratory.  Larger transducers are supplied with a certificate traceable to national standards.

For customers who wish to take advantage of Norbar's transducers but have an existing, non Norbar display instrument, transducers can be provided with a mV/V calibration.

Norbar's instruments and transducers are complimented by a wide range of ancillary products.  Within this group are the products that would be required to set up a torque calibration laboratory, for example, torque wrench loaders meeting ISO requirements and precision beam and weight systems for calibration of torque transducers.

The new 'TorqCheck' torque wrench testers aim to cut the cost of purchasing a torque wrench calibration system, and remove the fears over the complexity of using such equipment.

There are two versions available, the 'TorqCheck' being the most basic version, and the 'TorqCheck Plus' having greater functionality, to offer more flexibility.

'Pro-Test' is priced to make in-house testing a viable proposition even for the smaller industrial and automotive torque wrench user.

• Guaranteed classification to BS7882:1997 , Class 1 or better over the primary calibration range (20% to 100% of full scale), Class 2 or better over the secondary calibration range (lowest calibrated value to 20% of full scale). Class 1 equates to +/-0.5% of reading.
• Three essential operating modes allow the Pro-Test to be used with all torque wrench types 'Track' displays the live value, 'Peak Memory' records the highest value and 'First Peak Memory' records the first peak of torque (for click type torque wrenches). Both memory modes can be used with manual or automatic reset.
• Large back lit display is easily visible from a distance and in poor light.
• Display and Transducer are hard-wired together with a 600 mm cable.
• All common units of torque measurement are included.
• Pictorial mode selection incorporated for ease of use.
• User can select the language they wish to work in (most European languages are  included).
• Transducer can be mounted for torque wrench operation in the horizontal or vertical plane.
• RS-232-C is included for the output of reading to a printer, PC, data capture unit, SPC software etc.
• Optional mounting plate gives greater flexibility of mounting options.
• All user settable parameters are menu selectable from the front panel.
• Supplied in a robust plastic case with a data transfer lead to connect to a PC or printer.
• As standard, all transducers are calibrated in a clockwise direction. For additional anti clockwise direction order Part No. PROTEST.CCW.

Featuring an internal transducer complete with Rundown Fixture, the TST is available in 3 torque ranges, 0.04 to 2 N.m, 0.5 N.m to 10 N.m and 1.25 to 25 N.m. Class 1 system accuracy over its Primary range (=/-0.5% of reading from 20% to 100% of full scale).

What makes the TST genuinely versatile is the interface for an external transducer. This interface, accessed by a 2 way switch in the TST, allows the connection of any transducer from Norbar's "SMART" range and most mV/V calibrated transucers from Norbar or other manufacturers.

• Pictorial display panel for easy mode selection.
• Limit detectiond with low, pass and fail indication. Up to 8 target values can be set.
• Digital limit state output for control of external tools.
• Operation from fast charge internal battery pack (maximum time of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts).
• RS-232-C serial data interface for connection to a printer or PC. Continuous RS 232 output when used in track mode (up to 11 readings per sec).
• Pulse count feature in Impulse mode and Clutch Tool mode.
• 'SMART' intelligence for transducer recognition.
• Memory for calibration details of 20 non-'SMART' mV/V calibrated transducers.
• Analogue output allows the instrument to be used as part of a process control system for performance analysis.
• User selectable frequency response for each mode of operation.
• All user selectable features have password protection. The instrument can be issued to users with only the required modes of operation and units of measure enabled. This feature can virtually eliminate operator induced errors.

Any transducer from Norbar's 'SMART' range and most mV/V calibrated transducers from Norbar or other manufacturers can be connected to the TTT. The 'SMART' feature means that once a transducer has been connected, the instrument will automatically recognise calibration details such as mV/v output, serial number and capacity.

• Pictorial display panel for easy mode selection.
• Limit detection with low, pass and fail indication. Up to 8 target values can be set.
• Digital limit state output for control of external tools.
• Operation from fast charge internal battery pack (maximum time of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts).
• RS-232-C serial data interface for connection to a printer or PC. Continuous RS 232 output when used in track mode (up to 11 readings per sec).
• Pulse count feature in Impulse mode and Clutch Tool mode.
• 'SMART' intelligence for transducer recognition.
• Memory for calibration details of 20  non-'SMART' mV/V calibrated transducers.
• Analogue output allows the instrument to be used as part of a process control system for performance analysis.
• User selectable frequency response for each mode of operation.
• All user selectable features have password protection. The instrument can be issued to users with only the required modes of operation and units of measure enabled. This feature can virtually eliminate operator induced errors.

• Classified to BS7882:1997, typically better than Class 1 for the primary classification range (+/-0.5% of reading from 20% to 100% of full scale).
• 'SMART' - TST and TTT instruments will automatically recognise calibration details.
• Rundown Fixture is included on transducers up to 150 N.m (100 lbf.ft) allowing joint simulation for power tool testing.
• Supplied with UKAS calibration certificate.
• Transducers are supplied with precision made square drive adaptors.

• Classified to BS7882:1997, typically better than Class 1 for the primary classification range (+/-0/5% of reading from 20% to 100% of full scale).
• 'SMART' - TST and TTT instruments will automatically recognise calibration details.
• Supplied with UKAS calibration certificate.

There are two models, STB1000 and STB3000. Transducer Lead is incorporated and is terminated in a Lemo® connector suitable for the TST and TTT.

• Up to 5000 N.m (5000 lbf.ft) classified to BS7882:1997, typically better than Class 1 for the primary classification range (+/-0.5% of reading from 20% to 100% of full scale).
• Robust, heat treated, alloy steel torsion shaft design.
• Designed to ignore non torsional forces.
• Operates in clockwise and anti-clockwise directions.
• Calibration up to 5000 N.m (lbf.ft) with UKAS  Certificate, above 5000 N.m (lbf.ft) with a traceable calibration certificate.
• Calibrated in clockwise direction as standard. Anti-clockwise provided on request.
• 'SMART' transducers have a built in memory circuit which contains essential information about the transducer. This information can be read by Norbar's 'TST' or 'TTT' instruments meaning that when the transducer is connected, it is immediately recognised and ready for use.
• 'SMART' transducers can also be used with many other instruments. However, these will operate as normal ratio calibrated (mV/V) transducers - the 'SMART' data will not be read.

This new range offers an additional model of 5 N.m capacity and class leading performance with impulse tools and will be supplied with a UKAS calibration certificate from Norbar's laboratory.

These trandsucers are known as 'SMART' transducers. They have built-in intelligence in the form of a memory circuit which contains essential information about the transducer which can be read by the appropriate type of instrument (TST & TTT), thus reducing set-up time.

They will also work with instruments that cannot read the memory information, by inputting the relevant calibration details manually.

Not for use with Impact Tools.

Angle measurement also available.

• Up to 5000 N.m (5000 lbf.ft) classified to BS7882:1997, typically better than Class 1 for the primary classification range (+/-0.5% of reading from 20% to 100% of full scale).
• Robust heat treated alloy steel torsion tube design.
• Designed to ignore non torsional forces.
• 'SMART' transducers have a built in memory circuit which contains essential information about the transducer. This information can be read by Norbar's 'TST' or 'TTT' instruments meaning that when the transducer is connected, it is immediately recognised and ready for use.
• 'SMART' transducers can also be used with many other instruments. However, these will operate as normal ratio calibrated (mV/V) transducers - the 'SMART' data will not be read.

Designed to suit the majority of torque wrenches available with a torque value between 1 to 1500 N.m, the TWL1500 has been manufactured using quality materials that will provide many years of continuous, trouble-free operation.

• The high ratio, 1200:1 (ISO 2000, 1250:1) gearbox allows high torques to be applied, whilst ensuring that the operator does not exceed the rate of increase of torque specified in the standards.
• The design allows for easy interchange of transducers using the Norbar Static Transducer system.
• The ISO 1000 90 degree facility allow the performance of torque wrenches to be checked in two planes. Many wrenches give different torque values according to their orientation in use.
• Floating reaction point minimises side loads on wrench.
• ISO 2000 reaction extension bar allows wrenches uo to 2250mm to be tested. This can be removed to save space. Wrenches up to 1045mm can be tested when the extension bar is not fitted.
• Optional Small Reaction Plate allows torque wrenches down to 100mm in length (centre of square to centre of handle) to be tested.
• Motorised version with speed control is available for the ISO 1000. This can be purchased as a kit to motorise an existing ISO or as a complete ISO 1000 Motorised Torque Wrench Tester.

• Ensures the correct mounting of Norbar's Static Torque Transducers up to 5000 N.m (5000 lbf.ft).
• All bench stands (except Extra Large) are machined to accept Norbar Rundown Nose Assemblies (Joint Simulators) for power tool testing and calibration.
• For transducers in the range 1 N.m to 10 N.m (100 ozf.in to 100 lbf.in), Torque Limiting Bench stands are available. These are designed to prevent transducer over-load.
• All 'Small Frame Size' Bench Stands can be mounted horizontally or vertically.

• Suitable for a wide variety of power tools including pneumatic/electric screwdriver and angle wrenches with either clutch or stall torque control.
• Models available for torques from 0.2 N.m to 500 N.m (2 lbf.in to 500 lbf.ft).
• Spring washers and full instructions are provided to simulate a wide range of joint types as detailed in: BS6268:1982, BS6544:1981, ISO5393:1981.

• Certificate can be customised with the laboratory's own name and contact details.
• The certificate format complies with the requirements of ISO 6789.
• The software steps the operator through the calibration process making it very simple to use.
• A certificate number is automatically generated. Certificates are filed and can easily be retrieved.

Particularly suited for use in the Offshore and Power Generation industries, the combination of high quality components, sound design and many years field experience allow calibration and control in previously restrictive areas.

The IP65/IP67 rating gives the product protection against dust ingression, pressurised water jet and complete water immersion to a 1 metre depth for a 30 minute period.

The HE range provides a fully traceable system to National calibration standards through Norbar's own UKAS accredited laboratory.

• Stainless steel transducer design with 'SMART' intelligence.
• Bi-Direction calibration for both instrument and transducer.
• Class 1 accuracy over the 'Primary' classification range (+/-0.5% of reading from 20% to 100% of full scale).
• Battery power for use in harsh environments (mains supply for charging).
• Continuous RS-232-C output.
• Analogue output.
• Limit indication for up to 8 user defined target values.
• HE transducers are available in both static and annular transducer designs.