Annular Torque Transducer 1500 Series These Annular transducers are designed to fit directly to Norbar gearboxes in the '1500 Series' (Pneutorque, Electrotorque and Handtorque) and will accurately measure the torque output via a display instrument.

• Accuracy of ± 0.5% of reading, through out the calibrated range. 

• Robust heat treated alloy steel torsion tube design 

• Designed to ignore non torsional forces. 

• Incorporates slip rings to ensure that the cable will not wrap around the tool during operation (not included in transducers for 'Remote' tools or Handtorque) 'SMART' transducers have a built in memory circuit which contains essential information about the transducer. This information can be read by Norbar's 'Pro Log' instrument meaning that when the transducer is connected, it is immediately recognized and ready for use. When ordering for a Pro-Log, use part code suffix .LOG' (eg. 50659 LOG) if you require a torque units calibration certificate.

• 'SMART' transducers can also be used with many instruments not of Norbar manufacture. However, these will operate as normal ratio calibrated (mV/V) transducers ­the 'SMART' data will not be read. For non-Norbar instruments or for when a mV/V certificate is required, use part code suffix .IND'.

NOTE: When fitting a transducer to a HT15 torque multiplier, select the 'Remote' type.