Home » Pneumatic » PTM72 Series » Stall Models » PTM-72-1350-B

Pneumatic Multiplier, 1350 N.m, Bi-Directional, Stall, 1" square drive; Pneutorque PTM-72-1350-B

Model Shown: PTM-72-1000 Bi-Directional

PTM-72 tools use the same 'twin motor' handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool.

Also available as Internal and External Control, Shut-Off tools.


Product's part number:  18103.B08
Product's NATO number: 
Product's Accuracy:  +/-5%
Operates between:
200 - 1000 lbf.ft
270 - 1350 N.m

    Technical Specification
  • Square Size: 1"
  • Max Air Pressure: 6.3 bar
  • Air Consumption: 19 litres/sec (40 CFM)
  • Tool Weight: 6.1 kg
  • Reaction Plate Weight: 0.7 kg
  • Free Speed: 105 rpm
    Features
  • On Bi-Directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the gearbox.
  • Fast - 1000 N.m version has a free speed of 140 rpm for rapid bolt run-down.
  • 1" square drive available for the 1000 N.m version, Part No. 18492.
  • Quiet - less than 85 dB(A) when under load.
  • Non impacting - low vibration levels make these tools comfortable and safe to use.
  • Square drive is quickly and easily replaceable.
  • 'Soft Start' trigger control aids socket location and allows gradual and safe reaction location.
  • For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator.
  • Light weight - single direction 2000 N.m stall tool weighs just 6.2 kg.