Home » Pneumatic » Remote Control Series » Remote Control 72mm

Categories: Pneumatic Torque Products

Pneutorque® Remote Control Series 72mm Series

Pneutorque® Remote Control Series
72mm Series

Remote control versions have no direction/shut-off control on the tool but rely on external pneumatic circuitry to provide this function.This opens up numerous application possibilities for the Pneutorque ranging from simple stall shut-off in a hazardous working environment to sophisticated, multi-spindle torque and angle shut-off systems.

  • Stall control gives repeatability of ±5% on a given joint.
  • Torque transducers and angle encoders available for all models.These form the basis of sophisticated control systems giving repeatability of up to ±2%. See page 74.
  • Automatic Two Speed gearbox reduces run-down times.
  • Each gearbox supplied with a standard reaction device or, on request, one specifically designed to suit the application.

72mm Series, Remote Control

Model Square
Drive		 Part
Code		 Range Free
Speed†		 A B Tool
Weight		 Reaction
Weight
in N.m lbf.ft RPM mm mm kg kg
500 3/4 18031 90-500 66-370 35 72 290.2 6.4 1.7
500AUT 3/4 18031.AUT 203-500 150-370 170 72 362.2 8.7 1.7
1000 3/4 18030 190-1000 140-740 15 72 290.2 6.4 1.7
1000AUT 3/4 18030.AUT 488-1000 360-740 75 72 362.2 8.7 1.7
1000 1 18032 190-1000 140-740 15 72 290.2 6.4 1.7
1000AUT 1 18032.AUT 488-1000 360-740 75 72 362.2 8.7 1.7
1500 1 18029 300-1500 220-1110 9 72 290.2 6.4 1.7
1500AUT 1 18029.AUT 760-1500 560-1110 45 72 362.2 8.7 1.7
2000 1 18034 400-2000 300-1450 6 72 290.2 6.4 1.7
2000AUT 1 18034.AUT 1000-2000 750-1450 30 72 362.2 8.7 1.7

†Speed at maximum air pressure and in high gear where applicable.

 

Models Available